Hot rolled is the basic carbon steel product produced by the steel mill and is applied to applications where surface finish is not critical.Hot Rolled Sheet is used for a wide range of applications, from simple bends to complex draws or structural applications that require a specific strength level. The steel grade and processing technique of the metal are important in order to meet the customer requirements.

Product
HR Sheet
HR Coil
Thickness
1.2, 1.6, 2.0, 2.5, 3.0, 3.5, 4.0, 4.5mm 12G, 14G, 15G, 16G
1.6, 1.8, 2.0, 2.2, 2.5, 2.8, 3.1, 3.5, 3.8, 4.3, 4.6, 4.8, 5.0, 5.1, 5.6, 6.0, 6.2, 7, 8, 8.6, 9.2, 10, 11, 12, 14, 16
Width X Length
 1000 to 1400MM X 2500 to 4500MM
Width: 930 to 1420MM in coils
Grade
IS 10748/1995 grades I, II, III, IS 5986/1992 Fe 410, 510, API 5L grades A, B, X42, X46, X52, X56, X60, X65, SAIL-WTCR, IS 11513/1985 grades O, D, DD, EDD, IS 1079/ 1994 grades O, D, DD, EDD, IS 2062/ 1999, Medium Carbon Strapping Steel, MC-11, C-30, 40, 50, Medium Silicon Electrical Steel, IS 6240/1999, SAILMA, IS 2062 grades B, C, IS 5986/1992 Fe 330, 360, 410, 510, SAILRIM, E-34, E-38, SAPH 440, IS 2062/1999 Grade B with copper, SAILCOR/ IRSM-41, IS 8500/1992, SAE 1020, SAE 1012, SAE 1541. Thickness and width tolerances are as per IS 1852/ 1985
IS 10748/1995 grades I, II, III, IS 5986/1992 Fe 410, 510, API 5L grades A, B, X42, X46, X52, X56, X60, X65, SAIL-WTCR, IS 11513/1985 grades O, D, DD, EDD, IS 1079/ 1994 grades O, D, DD, EDD, IS 2062/ 1999, Medium Carbon Strapping Steel, MC-11, C-30, 40, 50, Medium Silicon Electrical Steel, IS 6240/1999, SAILMA, IS 2062 grades B, C, IS 5986/1992 Fe 330, 360, 410, 510, SAILRIM, E-34, E-38, SAPH 440, IS 2062/1999 Grade B with copper, SAILCOR/ IRSM-41, IS 8500/1992, SAE 1020, SAE 1012, SAE 1541.
Application