Mild Steel & Structural Steels

CR steel sheets have good malleability, ductility and ability to deform; with good flatness and excellent surface, are available with different thickness and width combinations; are mainly used to manufacture the high value-added products in automotive and appliance, beverage packaging, electronic, electrcial moor and building etc.

{supertable}

Product	Thickness	Width	Length	Grades	Application
CR Coils	0.27, 0.30, 0.35, 0.40, 0.45, 0.5, 0.55, 0.58, 0.6, 0.63, 0.7, 0.8, 0.9, 1, 1.2, 1.25,1.50, 1.60, 1.85, 2	900 to 1580MM		IS 513/1994 (O, D, DD & EDD), IRSM 41, SAILCOR, Copper Bearing, HSCR - 26/35, ASTM A 568/366, BS-1449-Pt-1, JIS G 3141 SPCC/CD, DIN-1623 St 12.3, Drawing, Deep Drawing, Extra Deep Drawing, SAE1006, SAE1008, SAE1010
CR Sheet	0.60, 0.63, 0.70, 0.80, 0.90, 1.00, 1.25, 1.50, 1.60, 1.85, 2.00	900 to 1500MM	1815 to 3600MM	IS 513/1994 (O, D, DD & EDD), IRSM 41, SAILCOR, Copper Bearing, HSCR - 26/35, ASTM A 568/366, BS-1449-Pt-1, JIS G 3141 SPCC/CD, DIN-1623 St 12.3, Drawing, Deep Drawing, Extra Deep Drawing, SAE1006, SAE1008, SAE1010

{/supertable}

التفاصيل

كتب بواسطة: Super User

Hot rolled is the basic carbon steel product produced by the steel mill and is applied to applications where surface finish is not critical.Hot Rolled Sheet is used for a wide range of applications, from simple bends to complex draws or structural applications that require a specific strength level. The steel grade and processing technique of the metal are important in order to meet the customer requirements.

{supertable}

Product	Thickness	Width X Length	Grade	Application
HR Sheet	1.2, 1.6, 2.0, 2.5, 3.0, 3.5, 4.0, 4.5mm 12G, 14G, 15G, 16G	1000 to 1400MM X 2500 to 4500MM	IS 10748/1995 grades I, II, III, IS 5986/1992 Fe 410, 510, API 5L grades A, B, X42, X46, X52, X56, X60, X65, SAIL-WTCR, IS 11513/1985 grades O, D, DD, EDD, IS 1079/ 1994 grades O, D, DD, EDD, IS 2062/ 1999, Medium Carbon Strapping Steel, MC-11, C-30, 40, 50, Medium Silicon Electrical Steel, IS 6240/1999, SAILMA, IS 2062 grades B, C, IS 5986/1992 Fe 330, 360, 410, 510, SAILRIM, E-34, E-38, SAPH 440, IS 2062/1999 Grade B with copper, SAILCOR/ IRSM-41, IS 8500/1992, SAE 1020, SAE 1012, SAE 1541. Thickness and width tolerances are as per IS 1852/ 1985
HR Coil	1.6, 1.8, 2.0, 2.2, 2.5, 2.8, 3.1, 3.5, 3.8, 4.3, 4.6, 4.8, 5.0, 5.1, 5.6, 6.0, 6.2, 7, 8, 8.6, 9.2, 10, 11, 12, 14, 16	Width: 930 to 1420MM in coils	IS 10748/1995 grades I, II, III, IS 5986/1992 Fe 410, 510, API 5L grades A, B, X42, X46, X52, X56, X60, X65, SAIL-WTCR, IS 11513/1985 grades O, D, DD, EDD, IS 1079/ 1994 grades O, D, DD, EDD, IS 2062/ 1999, Medium Carbon Strapping Steel, MC-11, C-30, 40, 50, Medium Silicon Electrical Steel, IS 6240/1999, SAILMA, IS 2062 grades B, C, IS 5986/1992 Fe 330, 360, 410, 510, SAILRIM, E-34, E-38, SAPH 440, IS 2062/1999 Grade B with copper, SAILCOR/ IRSM-41, IS 8500/1992, SAE 1020, SAE 1012, SAE 1541.

{/supertable}

التفاصيل

كتب بواسطة: Super User