Hot rolled is the basic carbon steel product produced by the steel mill and is applied to applications where surface finish is not critical.Hot Rolled Sheet is used for a wide range of applications, from simple bends to complex draws or structural applications that require a specific strength level. The steel grade and processing technique of the metal are important in order to meet the customer requirements.
{supertable}
| Product | Thickness | Width X Length | Grade | Application |
|
HR Sheet |
1.2, 1.6, 2.0, 2.5, 3.0, 3.5, 4.0, 4.5mm 12G, 14G, 15G, 16G |
1000 to 1400MM X 2500 to 4500MM |
IS 10748/1995 grades I, II, III, IS 5986/1992 Fe 410, 510, API 5L grades A, B, X42, X46, X52, X56, X60, X65, SAIL-WTCR, IS 11513/1985 grades O, D, DD, EDD, IS 1079/ 1994 grades O, D, DD, EDD, IS 2062/ 1999, Medium Carbon Strapping Steel, MC-11, C-30, 40, 50, Medium Silicon Electrical Steel, IS 6240/1999, SAILMA, IS 2062 grades B, C, IS 5986/1992 Fe 330, 360, 410, 510, SAILRIM, E-34, E-38, SAPH 440, IS 2062/1999 Grade B with copper, SAILCOR/ IRSM-41, IS 8500/1992, SAE 1020, SAE 1012, SAE 1541. Thickness and width tolerances are as per IS 1852/ 1985 |
|
|
HR Coil |
1.6, 1.8, 2.0, 2.2, 2.5, 2.8, 3.1, 3.5, 3.8, 4.3, 4.6, 4.8, 5.0, 5.1, 5.6, 6.0, 6.2, 7, 8, 8.6, 9.2, 10, 11, 12, 14, 16 |
Width: 930 to 1420MM in coils |
IS 10748/1995 grades I, II, III, IS 5986/1992 Fe 410, 510, API 5L grades A, B, X42, X46, X52, X56, X60, X65, SAIL-WTCR, IS 11513/1985 grades O, D, DD, EDD, IS 1079/ 1994 grades O, D, DD, EDD, IS 2062/ 1999, Medium Carbon Strapping Steel, MC-11, C-30, 40, 50, Medium Silicon Electrical Steel, IS 6240/1999, SAILMA, IS 2062 grades B, C, IS 5986/1992 Fe 330, 360, 410, 510, SAILRIM, E-34, E-38, SAPH 440, IS 2062/1999 Grade B with copper, SAILCOR/ IRSM-41, IS 8500/1992, SAE 1020, SAE 1012, SAE 1541. |
{/supertable}